Talgo Manager Takes Issue With NTSB Report

A Talgo manager said the National Transportation Safety Board that its report on the derailment of an Amtrak train in Washington State in December 2017 contains many errors and unsubstantiated statements.

The NTSB recommended that Amtrak and the Washington State Department of Transportation remove from service immediately the Talgo Series VI trainsets and replace them with equipment that meets current federal safety standards.

Talgo has asked the Board to reconsider its conclusions and recommendations in the case.

Talgo’s Director of Product Development and Compliance Joshua D. Coran told Railway Age that the recommendation to cease using Talgo equipment immediately was “unprecedented and nonsense.”

“I have researched every available NTSB report of passenger train derailments and collisions dating back to 1971,” he told the magazine. “I have found 33. None recommends the removal of an entire fleet of cars.”

The NTSB report concluded that because the Talgo Series VI equipment did not meet federal safety standards it poses an unnecessary risk to passenger safety.

Talgo Series VI equipment was being used on Cascades No. 501, which derailed due to going too fast on a curve.

The NTSB concluded that the Talgo equipment did not provide adequate passenger protection and was structurally vulnerable if involved in a high-energy derailment or collision due to its lack of crashworthiness protections.

The Talgo equipment, though, was in compliance with Federal Railroad Regulations having been “grandfathered” in on one FRA regulation.

In an editor’s note, Railway Age noted that Coran’s comments were his own and not necessarily reflective of the views of Talgo.

Coran said the NTSB’s recommendation “to replace compliant equipment with compliant equipment makes no sense, as it accomplishes nothing except negative commercial impact on the manufacturer of the criticized equipment, Talgo, and benefits manufacturers of potential replacements.

More of his comments can be found at https://www.railwayage.com/safety/ntsb-amtrak-501-report-errors-and-unsupported-statements/

Tags: , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.


%d bloggers like this: